- MoveOne fixture on the downstage truss follows your pointer. Nothing else in the rig moves unprompted.
- Scroll upRun the load-in backwards in the completed room and it becomes the load-out.
- HoverInspect the network layer before anything goes wrong and the failover route draws itself.
- Press TA tap test. One ring leaves every audio position and arrives by distance at 343 m/s.
- Double-clickA gel check on any fixture in the room. Beam to full, address printed.
- WaitLeave the room alone and the house goes to standby.
- Activate earlyReach for Activate before all nine layers are in the room.
- Type crowdFill the room to see what throughput looks like.
Nothing saved yet. Three is enough to start a call.
Start with an idea.
Or start without one.
Interactive games and brand activations, developed with your team and built to run.
Move the pointer. The room is listening.Touch the room. It is listening.
Technology and creativity working
for you. Since 1989.
- Dark room. The venue is barely visible.
- First signal. One line scans the floor, walls, and ceiling.
- Build. Truss, LED, lighting, scenic surfaces, sensors, and control positions assemble.
- Human input. A participant enters and activates the system.
- System response. Input travels through the room and returns as light, image, sound, score, or physical effect.
- Hold. The room settles.
Choose where you are starting.
We will meet you there.
Start with a blank page, a rough direction, or an approved concept. Every path ends in the same room.
Select your path
Six ways in.
Drag one to watch it work.
Each activation is shown in three states: waiting, participating, and responding. Drag across a frame, or use the slider, to move the same room through all three. Save up to three to the working board.
Concept imagery. Generated for this page, not a photograph of past work.
Six inputs. One rig. One crew.
Every activation above runs its output into the same LED wall, the same lighting rig, the same audio position, and the same control desk. That is the part that does not change when the idea does.
A good first call can start with three ideas.
We will bring more.
Continue to the completed room.Bring the starting point.
We will put it on the floor.
Three decisions, made in order. The plan redraws itself around each one. When it is ready, make the plan and the room draws itself out in full.
A real SW spatial model, published as a navigable panorama. It loads from a third-party viewer, so nothing is requested until you press play.
Open in a new tab →Shape the interaction
What the participant actually does. Everything downstream follows from this.
Put it in real space
The plan outline, the audience flow, and the constraint set all change here.
Decide the response
Pick as many as the idea needs. The first one sets the concept image. Each one adds a device, a cable run, and an operator decision to the plan.
Choose an interaction, a space, and at least one response.
Now try to break it.
Probe any one of these against the plan. The answer comes back in class terms, because a class survives a change of venue and a number does not.
Make the plan first. Then probe it.
This is not a quote. It is the list of decisions we make with you.
Where it stands
- Direction selected.An interaction has not been chosen yet.
- Interaction defined.The space and the response set are still open.
- Room tested.Nothing has been probed against the plan.
- Ready to engineer.The plan has not been drawn.
What the plan says
What we would ask on the call
The room decided most of this.
We just wrote it down.
Continue to the completed room.Your render is the starting line.
We build what makes it run.
Add the nine layers the approved creative sits on and watch the room arrive, one pass at a time. Activate it when all nine are in, then find out what happens when one of them drops. Illustrative capability visualisation, not a quote, an equipment list, or a final system design.
Nine layers, in build order. Add the first one and the room starts arriving.
What we need from you.
Six inputs. Open one to see the level of detail the build actually runs on. Illustrative contents, not a request list for a live project.
Every one of these opens.
01Venue drawings4 sheets
- A-101 Floor plan with column grid and egress widths
- A-201 Reflected ceiling plan with structural steel
- S-301 Rigging capacity notes, or a written no-rigging condition
- E-401 Power single line with drop locations and phases
02Production schedule7 phases
- Marshalling Dock window, lift access, and who holds the keys
- Structure Ground support up, ballast placed and signed off
- Cable Runs pulled, ramped, and labelled at both ends
- Addressing Fixtures patched, devices on the network, IDs recorded
- Calibration LED uniformity, audio alignment, sensor coverage
- Testing Every interaction run cold, then run again
- Rehearsal Operators on headset, recovery paths walked
03Content requirements5 items
- Canvas Pixel map of every surface, with bezel and seam positions
- States Waiting, participating, responding, and reset
- Delivery Frame rate, colour space, and codec the server expects
- Brand Lockup clear space, approved palette, approved type
- Fallback What plays if a source drops mid-show
04Audience interaction4 items
- Invitation How a person understands the offer without being told
- Session How long one turn lasts, and how it ends cleanly
- Reset What the next participant arrives to
- Refusal What the system does when the input is nonsense
05Operating environment5 items
- Light Ambient level at the interaction surface, worst case
- Noise Floor and peak, because a voice mechanic lives or dies here
- Weather Wind, water, and dust ratings if any part is outdoors
- Traffic Whether people stop, or pass through and glance
- Hours Doors to strike, and who is on shift for each block
06Touring and strike4 items
- Cases Case class, wheel type, and the heaviest single lift
- Repeatability Whether the next room is known or unknown
- Spares What travels twice because it cannot fail twice
- Strike Reverse order, de-address, and the condition it goes back in
Creative locked. Inputs and outputs mapped.
Crew, controls, and the recovery path defined.
Continue to the completed room.From the drawing to the room,
built by one team.
One continuous move, from the drawing to the room in use. Scroll through it, or take the slider and run it yourself. Drag backward and it becomes the load-out, in reverse order, because that is how it actually goes.
Drawing, model, empty room, cases, structure, surfaces, focus, doors. The order is the plan.
What you built on the way here.
Open any row to see what that choice actually commits. Nothing is stored and nothing is sent.
You have not made a choice yet. The room above is a representative activation, so there is still something to look at.
Six rooms SW has already built.
Real work, real crews, real load-ins. Six rooms, from a branded hospitality suite and an exhibition booth to a gaming studio and a forced-perspective LED corner with content SW made itself.
Bring us the brief.
Or bring us the blank page.
A first call can start with a finished render, a rough direction, or three questions. We will bring ideas and the people who know how to build them.
SW Event Technology provides the design, fabrication, technology and crew to take an activation from the first idea to the show floor.
One idea. One team. A room people step into.
Exhibiting on a show floor? The booth build, the AV inside it, and the crew that runs both are on the exhibits and trade shows page.
Reach us directly
Our online form is coming back shortly.
Regional lines